Technology18 November 2026
Compact thermoforming machines: when a smaller thermoformer makes sense
A compact thermoforming machine forms, vacuum packs and seals product on a much shorter frame than a full-size thermoformer, for producers with limited floor space or lower volumes.
What a compact thermoformer is
A thermoformer makes the pack as part of its own cycle. Film is heated and formed into a cavity, the product is loaded, and the pack is sealed and separated on one frame. Our guide to thermoforming pack depth and output explains each stage in more detail.
A compact thermoformer runs the same process on a shorter machine. The VKF5 is 2350 mm long, 1000 mm wide and 1690 mm high. By comparison, the VKF50 runs from 4185 mm to 7185 mm long depending on configuration.
When a compact thermoformer makes sense
A smaller machine is usually worth considering when:
- Floor space is limited, or the machine has to fit into an existing production layout without moving other equipment.
- Production volumes are lower or still growing, and the initial investment needs to match current output.
- The product suits flexible vacuum film packs rather than rigid trays.
- The machine may need to move between areas of the factory. The VKF5 can be fitted with an optional set of wheels for this.
Where volumes are already high, or a line needs deeper packs and integration with dosing and loading equipment, a larger thermoformer is normally the better long-term fit.
Vacuum and MAP packs in flexible film
The VKF5 runs flexible vacuum film and can produce two types of pack:
- Vacuum packs: all air is removed from the pack to extend shelf life, reduce oxidation and make the flexible film sit tightly around the product. This suits sliced meats, cured meats, aged cheeses and seafood.
- MAP packs in flexible film: the removed air is replaced with a calibrated mix of protective gases to help preserve freshness and appearance. This vacuum-gas (VG) function is an optional extra and suits fresh pasta, baked goods, ready meals, fruit and vegetables and dairy products.
Not every compact machine runs every pack type, so check this first. If your product needs a rigid formed tray, a skin pack or a sealed pack without vacuum, the FormPack thermoformers and larger VKF machines can be configured for sealing, MAP, vacuum and skin packs.
Output options
Thermoformer output is quoted in cycles per minute. The VKF5 runs at 6 to 7 cycles a minute, depending on configuration and application, while the VKF50 runs at up to 14.
Each cycle can produce more than one pack, so packs per minute depends on how many cavities the format holds. The VKF5 has 12 format layouts, so the right layout for your pack size has a direct effect on output. Filling speed and changeovers also affect how many saleable packs a line produces in a shift, as our article on how packaging machinery impacts production line throughput explains.
Pack size and depth
The step is how far the film moves forward each cycle, and it sets the pack length available. On the VKF5, the step is up to 320 mm. Forming height is 80 mm as standard, with a 120 mm option for deeper products.
If your packs need more length or depth than this, look at a larger machine. The VKF50, for example, has a maximum step of 480 mm and a maximum forming depth of 150 mm.
What to check before choosing a compact thermoformer
- Space and access: measure the area available, including room for loading, film changes and cleaning, against the machine dimensions.
- Pack type: confirm whether your product needs vacuum, MAP, skin or a standard sealed pack.
- Pack size: check the step and forming height against your largest pack.
- Output: work out packs per minute from cycles per minute and the format layout, then compare it with your target across a shift.
- Format changes: on the VKF5, the welding frame can be changed without tools, which helps if you run several pack sizes.
- Hygiene: a frame made entirely from stainless steel supports cleaning in food and medical packaging applications.
- Coding and traceability: an optional inkjet printing system on the VKF5 prints batch numbers, dates and barcodes onto the pack, so a separate labelling machine is not needed.
Speak to ILPRA UK about a compact thermoformer
Whether you are moving into thermoforming for the first time or adding capacity in a tight space, the ILPRA UK team can help you match the machine, pack type and format to your product and output targets, then handle installation, commissioning and ongoing service in the UK.